Compression Fittings – Are They A Fitting Solution For Your System?

Compression Fittings – Are They A Fitting Solution For Your System?

Compression fittings, one of the most common and adaptable methods for connecting metal or hard plastic pipes. This is especially true for extreme temperatures and compressor performance pressures and compatibility with corrosive fluids may be in different systems, refinery gas duct below the pipe line can be seen. Compact compression fittings are used from chromatography and bomb detectors to medical equipment and inkjet applications. All compression fittings applications have many features, whether or not they are in your home pipeline or a hazardous chemical water heater. They are always easy to assemble, have long life and undeniably have no

Industrial systems use a wide variety of compression fitting. These components are carefully selected to ensure compatibility, performance and security. Whether in pneumatic or hydraulic systems, it is necessary to distinguish the different valves.

It is difficult to distinguish threaded joints from compression seals. If the compression fittings are suitable for the system, they may be more difficult to understand. However, the basics of compression fittings can help you solve the problem. The things you need to know to make the right decision are as follows.

What is the difference between compression seals?

Both thread and compression fitting use threads to improve the connection. The difference is how each thread is executed.

The thread fitting has only one connection. The threads are tapered for sealing connections. In contrast, the compression fitting do not use threads for sealing purposes.

The latter has three connected parts to create a sealed. The seal consists of a compression nutand aferrule. The thread is responsible for keeping the body with the nut.

Working principles?

By pressure adjustment, a seal is created by the action of force.

These three-piece assemblies include pressure nuts, inner rings or ferrules and connectors. When the nut is tightened, the ferrule presses against the tube. The force used for this operation is sufficient to eliminate the extra space that may be present in the joint. This prevents the escape of transmission fluid or gas. As mentioned above, it is a kind of seal ring without thread or connection.

Compression Fittings – Are They A Fitting Solution For Your System?

Are they a good choice?

For most systems, compression fittings provide adequate sealing without the need for welding or soldering fittings. In addition, special tools or techniques are not required to install these fittings. You can easily remove the faucet for maintenance in one place. The connection is easily damaged and can be reassembled without damage.

However, do not put too much on the component. The ring may be damaged. If the ferrule does not have enough power to turn around, stop tightening if the nut does not turn with some forces.

As no soldering or welding is required, pressure fittings are suitable for high temperature applications and flammable materials. Use flared and non-tapered compression fittings for quick installation.

As a manufacturer of compression fittings, we offer a variety of models that meet the needs of your application. For example, our 37 degree cone seals are widely used in various industrial systems. For more information, see the product catalog.